300-715 Exam Info and Free Practice Test All-in-One Exam Guide Nov-2025
Pass Cisco 300-715 Actual Free Exam Q&As Updated Dump Nov 30, 2025
Candidates who pass the Cisco 300-715 certification exam demonstrate their ability to design and implement secure network access policies, implement advanced authentication and authorization policies, and manage network device access control using ISE. Implementing and Configuring Cisco Identity Services Engine certification exam is ideal for professionals who work with Cisco ISE solutions in a variety of industries, such as healthcare, finance, retail, and government. With the Cisco 300-715 certification, IT professionals can enhance their career prospects and demonstrate their proficiency in managing and securing network access.
NEW QUESTION # 162
Which two probes must be enabled for the ARP cache to function in the Cisco ISE profile service so that a user can reliably bind the IP address and MAC addresses of endpoints? (Choose two.)
- A. SNMP
- B. HTTP
- C. DHCP
- D. NetFlow
- E. RADIUS
Answer: C,E
Explanation:
Reference:
Cisco ISE implements an ARP cache in the profiling service, so that you can reliably map the IP addresses and the MAC addresses of endpoints. For the ARP cache to function, you must enable either the DHCP probe or the RADIUS probe. The DHCP and RADIUS probes carry the IP addresses and the MAC addresses of endpoints in the payload data. The dhcp-requested address attribute in the DHCP probe and the Framed-IP-address attribute in the RADIUS probe carry the IP addresses of endpoints, along with their MAC addresses, which can be mapped and stored in the ARP cache.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide_20_chapter_010100.html
NEW QUESTION # 163
Which two components are required for creating a Native Supplicant Profile within a BYOD flow? (Choose two)
- A. Connection Type
- B. Operating System
- C. Redirect ACL
- D. Windows Settings
- E. iOS Settings
Answer: A,B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_g
NEW QUESTION # 164
An ISE administrator must change the inactivity timer for MAB endpoints to terminate the authentication session whenever a switch port that is connected to an IP phone does not detect packets from the device for 30 minutes. Which action must be taken to accomplish this task?
- A. Change the idle-timeout on the Radius server to 3600 seconds for IP Phone endpoints.
- B. Add the authentication timer reauthenticate server command to the switchport.
- C. Add the authentication timer inactivity 3600 command to the switchport.
- D. Configure the session-timeout to be 3600 seconds on Cisco ISE.
Answer: C
NEW QUESTION # 165
An engineer is configuring web authentication using non-standard ports and needs the switch to redirect traffic to the correct port. Which command should be used to accomplish this task?
- A. aaa group server radius proxy
- B. permit tcp any any eq <port number>
- C. ip http port <port number>
- D. aaa group server radius
Answer: C
NEW QUESTION # 166
An engineer is configuring Cisco ISE to reprofile endpoints based only on new requests of INIT- REBOOT and SELECTING message types. Which probe should be used to accomplish this task?
- A. DHCP
- B. RADIUS
- C. MMAP
- D. DNS
Answer: A
Explanation:
The DHCP probe in your Cisco ISE deployment, when enabled, allows the Cisco ISE profiler service to re-profile endpoints based only on new requests of INIT-REBOOT, and SELECTING message types. Though other DHCP message types are processed such as RENEWING, and REBINDING, they are not used for profiling endpoints. Any attribute parsed out of DHCP packets is mapped to endpoint attributes.
https://www.cisco.com/en/US/docs/security/ise/1.0/user_guide/ise10_prof_pol.html#wp1341046
NEW QUESTION # 167
Which two actions occur when a Cisco ISE server device administrator logs in to a device? (Choose two)
- A. The Cisco ISE server queries the external identity store.
- B. The device queries the Cisco ISE authorization server
- C. The Cisco ISE server queries the internal identity store
- D. The device queries the external identity store
- E. The device queries the internal identity store
Answer: A,B
NEW QUESTION # 168
A network administrator is configuring authorization policies on Cisco ISE There is a requirement to use AD group assignments to control access to network resources After a recent power failure and Cisco ISE rebooting itself, the AD group assignments no longer work What is the cause of this issue?
- A. The AD join point is no longer connected.
- B. The AD DNS response is slow.
- C. The network devices ports are shut down.
- D. The certificate checks are not being conducted.
Answer: A
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/ise/2-3/ise_active_directory_integration/b_ISE_AD_integration_2x.html#ID612
NEW QUESTION # 169
The default (standalone) Cisco ISE node configuration has which role or roles enabled by default?
- A. Policy Service, Monitoring and Admin
- B. Administration only
- C. Inline Posture only
- D. Administration and Pokey Service
Answer: A
NEW QUESTION # 170
An engineer is using profiling to determine what access an endpoint must receive. After configuring both Cisco ISE and the network devices for 802.1X and profiling, the endpoints do not profile prior to authentication.
What are two reasons this is happening? (Choose two.)
- A. The SNMP probe is not enabled.
- B. NetFlow is not enable on the switch, so the attributes will not be collected.
- C. The switch is collecting the attributes via RADIUS but the probes are not sending them.
- D. Closed mode is restricting the collection of the attributes prior to authentication.
- E. The HTTP probe is malfunctioning due to closed mode being enabled.
Answer: C,D
NEW QUESTION # 171
An engineer must configure web redirection for guests to a portal where no authentication is required and an Acceptable Use Policy must be accepted by the guest before network access is allowed. Which type of guest portal must be configured in Cisco ISE to meet the requirement?
- A. Custom
- B. Self Registered
- C. Sponsored
- D. Hotspot
Answer: D
NEW QUESTION # 172
Drag the steps to configure a Cisco ISE node as a primary administration node from the left into the correct order on the night.
Answer:
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide Step 1 Choose Administration > System > Deployment.
The Register button will be disabled initially. To enable this button, you must configure a Primary PAN.
Step 2
Check the check box next to the current node, and click Edit.
Step 3
Click Make Primary to configure your Primary PAN.
Step 4
Enter data on the General Settings tab.
Step 5
Click Save to save the node configuration.
NEW QUESTION # 173
An engineer is assigned to enhance security across the campus network. The task is to enable MAB across all access switches in the network. Which command must be entered on the switch to enable MAB?
- A. Switch{conflg)# mab
- B. Switch(config)# authentication port-control auto
- C. Switch# authentication port-control auto
- D. Switch{config-lf) # mab
Answer: D
NEW QUESTION # 174
An engineer needs to export a file in CSV format, encrypted with the password C1$c0438563935, and contains users currently configured in Cisco ISE. Drag and drop the steps from the left into the sequence on the right to complete this task.
Answer:
Explanation:
NEW QUESTION # 175
An administrator needs to add a new third party network device to be used with Cisco ISE for Guest and BYOD authorizations. Which two features must be configured under Network Device Profile to achieve this? (Choose two.)
- A. dACL
- B. URL Redirect
- C. TACACS
- D. SNMP community
- E. CoA Type
Answer: B,E
NEW QUESTION # 176
An engineer must use Cisco ISE profiler services to provide network access to Cisco IP phones that cannot support 802.1X. Cisco ISE is configured to use the access switch device sensor information system-description and platform-type to profile Cisco IP phones and allow access.
Which two protocols must be configured on the switch to complete the configuration? (Choose two.)
- A. SNMP
- B. EAPOL
- C. CDP
- D. LLDP
- E. STP
Answer: C,D
NEW QUESTION # 177
An organization is implementing Cisco ISE posture services and must ensure that a host-based firewall is in place on every Windows and Mac computer that attempts to access the network They have multiple vendors' firewall applications for their devices, so the engineers creating the policies are unable to use a specific application check in order to validate the posture for this What should be done to enable this type of posture check?
- A. Enable the default rewall condition to check for any vendor rewall application.
- B. Use the file registry condition to ensure that the firewal is installed and running appropriately.
- C. Use a compound condition to look for the Windows or Mac native firewall applications.
- D. Enable the default application condition to identify the applications installed and validade the rewall app.
Answer: A
Explanation:
https://www.youtube.com/watch?v=6Kj8P8Hn7dY&t=109s&ab_channel=CiscoISE-IdentityServicesEngine
NEW QUESTION # 178
An engineer is starting to implement a wired 802.1X project throughout the campus. The task is to ensure that the authentication procedure is disabled on the ports but still allows all endpoints to connect to the network. Which port-control option must the engineer configure?
- A. auto
- B. force-unauthorized
- C. pae-disabled
- D. force-authorized
Answer: D
NEW QUESTION # 179
Which nodes are supported in a distributed Cisco ISE deployment?
- A. Monitoring nodes for PxGrid services
- B. Administration nodes for session failover
- C. Policy Service nodes for session failover
- D. Policy Service nodes for automatic failover
Answer: C
NEW QUESTION # 180
A network engineer must configure BYOD using Cisco ISE. In the deployment, the users must be able to submit CSR through the end devices. Which two features must be enabled to meet the requirement?
(Choose two.)
- A. A certificate provisioning portal must be configured.
- B. A new BYOD portal must be created.
- C. Cisco ISE Internal CA service must be enabled.
- D. Add SuperAdmin account into portal admin group.
- E. Define a certificate group tag.
Answer: A,C
NEW QUESTION # 181
A network administrator is configuring a secondary cisco ISE node from the backup configuration of the primary cisco ISE node to create a high availability pair The Cisco ISE CA certificates and keys must be manually backed up from the primary Cisco ISE and copied into the secondary Cisco ISE Which command most be issued for this to work?
- A. application configure Ise
- B. Import certificate Ise
- C. certificate configure Ise
- D. copy certificate Ise
Answer: A
Explanation:
https://community.cisco.com/t5/network-access-control/ise-certificate-import-export/m-p/3847746
NEW QUESTION # 182
Which three default endpoint identity groups does cisco ISE create? (Choose three )
- A. whitelist
- B. end point
- C. blacklist
- D. Unknown
- E. profiled
Answer: C,D,E
Explanation:
Explanation
Default Endpoint Identity Groups Created for Endpoints
Cisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
https://www.cisco.com/c/en/us/td/docs/security/ise/2-4/admin_guide/b_ise_admin_guide_24/b_ise_admin_guide
NEW QUESTION # 183
A company is attempting to improve their BYOD policies and restrict access based on certain criteria. The company's subnets are organized by building. Which attribute should be used in order to gain access based on location?
- A. device registration status
- B. static group assignment
- C. IP address
- D. MAC address
Answer: B
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_g
NEW QUESTION # 184
A user changes the status of a device to stolen in the My Devices Portal of Cisco ISE. The device was originally onboarded in the BYOD wireless Portal without a certificate. The device is found later, but the user cannot re-onboard the device because Cisco ISE assigned the device to the Blocklist endpoint identity group. What must the user do in the My Devices Portal to resolve this issue?
- A. Change the device state from Stolen to Not Registered.
- B. Change the BYOD registration attribute of the device to None.
- C. Delete the device, and then re-add the device.
- D. Manually remove the device from the Blocklist endpoint identity group.
Answer: A
NEW QUESTION # 185
Which two default endpoint identity groups does Cisco ISE create? (Choose two )
- A. endpoint
- B. allow list
- C. block list
- D. unknown
- E. profiled
Answer: D,E
Explanation:
Explanation
https://www.cisco.com/c/en/us/td/docs/security/ise/2-1/admin_guide/b_ise_admin_guide_21/b_ise_admin_guide Default Endpoint Identity Groups Created for EndpointsCisco ISE creates the following five endpoint identity groups by default: Blacklist, GuestEndpoints, Profiled, RegisteredDevices, and Unknown. In addition, it creates two more identity groups, such as Cisco-IP-Phone and Workstation, which are associated to the Profiled (parent) identity group. A parent group is the default identity group that exists in the system.
Cisco ISE creates the following endpoint identity groups:
* Blacklist-This endpoint identity group includes endpoints that are statically assigned to this group in Cisco ISE and endpoints that are block listed in the device registration portal. An authorization profile can be defined in Cisco ISE to permit, or deny network access to endpoints in this group.
* GuestEndpoints-This endpoint identity group includes endpoints that are used by guest users.
* Profiled-This endpoint identity group includes endpoints that match endpoint profiling policies except Cisco IP phones and workstations in Cisco ISE.
* RegisteredDevices-This endpoint identity group includes endpoints, which are registered devices that are added by an employee through the devices registration portal. The profiling service continues to profile these devices normally when they are assigned to this group. Endpoints are statically assigned to this group in Cisco ISE, and the profiling service cannot reassign them to any other identity group.
These devices will appear like any other endpoint in the endpoints list. You can edit, delete, and block these devices that you added through the device registration portal from the endpoints list in the Endpoints page in Cisco ISE. Devices that you have blocked in the device registration portal are
* assigned to the Blacklist endpoint identity group, and an authorization profile that exists in Cisco ISE redirects blocked devices to a URL, which displays "Unauthorised Network Access", a default portal page to the blocked devices.
* Unknown-This endpoint identity group includes endpoints that do not match any profile in Cisco ISE.
In addition to the above system created endpoint identity groups, Cisco ISE creates the following endpoint identity groups, which are associated to the Profiled identity group:
* Cisco-IP-Phone-An identity group that contains all the profiled Cisco IP phones on your network.
* Workstation-An identity group that contains all the profiled workstations on your network.
NEW QUESTION # 186
......
To pass the Cisco 300-715 exam, you will need to have a solid understanding of Cisco ISE architecture, deployment models, and best practices. You will also need to be familiar with the various Cisco ISE components, such as the Policy Service, Monitoring and Troubleshooting, and Guest Services. In addition, you should be able to configure and troubleshoot Cisco ISE policies, network access devices, and user and device authentication.
Cisco 300-715 exam is designed for IT professionals who are interested in validating their skills and knowledge in implementing and configuring Cisco Identity Services Engine (ISE). Implementing and Configuring Cisco Identity Services Engine certification exam is an essential requirement for professionals who want to work with Cisco ISE solutions in enterprise environments. 300-715 exam tests the candidates' abilities in configuring network access policies, administering network access security, and implementing ISE solutions.
Online Questions - Valid Practice 300-715 Exam Dumps Test Questions: https://pass4sure.guidetorrent.com/300-715-dumps-questions.html