NCM-MCI-5.15 Exam Info and Free Practice Test Professional Quiz Study Materials
Accurate Hot Selling NCM-MCI-5.15 Exam Dumps 2022 Newly Released
Prerequisites of Nutanix NCM-MCI-5.15 Exam
We make sure that you are completely prepared for the exam. In order to prepare for the exam, you need to have a basic knowledge of Nutanix, which can be acquired through self-learning. You can also check the exam preparation guide for more details. An ideal candidate should have some knowledge about the product and its features. They should have good communication skills. They should be able to perform tasks independently. They should be able to work in teams. The candidates should have some experience with the product.
NEW QUESTION 64
An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.
Which condition could result in this behavior?
- A. The Local authentication type must also be selected in PC.
- B. A role mapping needs to be associated with the AD group.
- C. A client chap certificate must also be added in PC.
- D. The users must be added to the Domain Admins AD group.
Answer: D
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-security-ro
NEW QUESTION 65
An administrator is deploying an application that requires maximum I/O throughput for scratch data. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with one virtual disk attached to the VM
- B. Create several virtual disks attached to the VM's virtual SCSI controller
- C. Create a volume group with several virtual disks and attach to the VM
- D. Create a virtual disk attached to the VM's PCI interface
Answer: C
Explanation:
Explanation
Ref:
https://next.nutanix.com/community-blog-40/scaling-up-vm-storage-performance-on-ahv-volume-group-load-b
NEW QUESTION 66
A customer has NearSync configured. When the administrator tries to restore a snapshot from 3 minutes ago, it is not available. The snapshots are happening at 15-minute intervals instead of at the 5-minute configured interval. When the protection domain was initially set up, the snapshots were happening at the expected
5-minute interval.
What should the customer do to enable the snapshots to happen at the expected interval?
- A. Change the protection domain to use Async DR
- B. Fix a connectivity issue because the protection domain reverted to Async
- C. Configure the protection domain to take snapshots on 15-minute intervals
- D. Utilize Metro Availability to meet this requirement
Answer: B
NEW QUESTION 67
An administrator needs to make sure an RF3 cluster can survive a failure of two complete racks without negatively affecting performance. The current cluster configuration consists of the following:
* 30 All Flash Nodes: distributed 10 nodes per rack across three 42U racks
* Each node is configured with 20TB usable storage all flash (Cluster Total 600TB Usable)
* Current cluster utilization is 500TB storage
* Storage containers have Erasure Coding enabled
Which configuration changes should be made to make sure the cluster meets the requirements?
- A. Expand the cluster to 40 nodes distributed evenly across 5 racks
- B. Expand the cluster to 60 nodes distributed evenly across 6 racks
- C. Expand the cluster to 48 nodes distributed evenly across 6 racks
- D. Expand the cluster to 50 nodes distributed evenly across 5 racks
Answer: B
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_17:arc-configure-fa
NEW QUESTION 68
An administrator responsible for a VDI environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDI VMs.
What are two impacts on the cluster? (Choose two.)
- A. Increase CPU utilization%
- B. Increasing CPU counts will decrease memory utilization
- C. Increase CPU ready%
- D. Increase memory utilization%
Answer: A,C
NEW QUESTION 69
An administrator is configuring an All Flash cluster to support the following workloads:
* Full clone virtual desktops
* Hadoop
* Write heavy databases
Which three correct configuration options should the administrator use to meet the item requirements?
(Choose three.)
For each procedure, indicate whether it is a correct or incorrect procedure that must be configured to meet the item requirements using the drop-down option.
Answer:
Explanation:
Explanation
Ref:
NEW QUESTION 70
An administrator finds that home shares cannot be configured in a new Files 3.5 deployment. Why is this happening?
- A. Access Based Enumeration is not enabled.
- B. The system is deployed as a single FSVM.
- C. NFS default access is set to Read Only.
- D. Multi-protocol access is not configured.
Answer: B
Explanation:
NEW QUESTION 71
An administrator needs to initiate a new VDI project within a couple of months. Prism Central reports there are no storage resources to accommodate such workloads.
The administrator sees many powered-off VMs and has the authority to delete test VMs powered off at least for 30 days. Test VMs belong to the Test category.
Using Prism Central, which steps are required to identify the correct VMs to be deleted?
- A. Create a new Scenario selecting Test VMs. filter by uptime
- B. Use Capacity Runway to filter by Test and Powered-off VMs
- C. Filter VMs list, choose Test category and Inactive under Efficiency
- D. Create a new Project selecting Test VMs, sorting by power state
Answer: C
Explanation:
NEW QUESTION 72
A Nutanix cluster is deployed with the following configuration:
* Three four-node blocks (A, B, and C)
* All Flash Redundancy Factor 2
What is the effect of simultaneous disk failures on two nodes located in block A?
- A. VM read and write operations continue normally.
- B. VMs are migrated off of the nodes with disk failures.
- C. VMs on the nodes with failed disks are unable to write data
- D. Each node with a failed disk is marked as degraded.
Answer: A
Explanation:
Explanation
Ref: https://next.nutanix.com/how-it-works-22/redundancy-factor-vs-replication-factor-37486
NEW QUESTION 73
An administrator of a Nutanix Enterprise Cloud has microsegmentation enabled and a firewall VM installed.
The security team notifies the administrator that one of the VMs hosted in the environment has been exhibiting suspect network activity. The administrator wants to isolate the VM from the production network, but must still be able to access it to perform diagnostics.
What should the administrator do to meet the requirement?
- A. Create a firewall rule that blocks VM traffic but permits diagnostic access
- B. Create a security policy with a service chain directing that VMs traffic to the firewall VM
- C. Quarantine the VM using the Forensic Method
- D. Disable the vNIC on the affected VM
Answer: B
Explanation:
Explanation
Ref https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000LIelCAG
NEW QUESTION 74
An administrator is deploying an application that requires maximum I/O throughput for scratch data. The administrator is concerned that the throughput requirement is greater than what can be provided by a single cluster node.
What should the administrator do to meet this requirement?
- A. Create a volume group with one virtual disk attached to the VM
- B. Create several virtual disks attached to the VM's virtual SCSI controller
- C. Create a volume group with several virtual disks and attach to the VM
- D. Create a virtual disk attached to the VM's PCI interface
Answer: C
Explanation:
Explanation
Ref:
https://next.nutanix.com/community-blog-40/scaling-up-vm-storage-performance-on-ahv-volume-group-load-ba
NEW QUESTION 75
A VM does not have enough resources for the demand, which leads to performance bottlenecks. The VM is exhibiting one or more of following baseline values, based on the past 30 days:
* CPU usage > 90% (moderate), 95% (high)
* CPU ready time > 5%, 10%
* Memory usage > 90%, 95%
* Memory swap rate > 0 Kbps (no moderate value)
Which type of VM is being described?
- A. Inactive VM
- B. Bully VM
- C. Constrained VM
- D. Over-provisioned VM
Answer: C
Explanation:
NEW QUESTION 76
An administrator has a 32-node hybrid cluster with CPU, RAM and storage utilization of 80%. A database VM is configured with VM Flash.
What is causing this IO latency?
- A. Database VM is experiencing high CPU ready time.
- B. VM Flash Mode reduces SSD tier capacity for VMs.
- C. Controller VM is experiencing high CPU ready time.
- D. Curator scans causes by ILM constantly moving data.
Answer: C
NEW QUESTION 77
An administrator is migrating 5MB shares from a third-party platform to Nutanix Files with the following characteristics:
* Shares contain user profile directories
* DFS-N will be used
How should the administrator create target shares for this migration?
- A. Create multiple distributed shares and distribute migrated data as evenly as possible.
- B. Create distributed shares with multiple top-level directories and distribute migrated data.
- C. Create multiple general purpose shares and distribute migrated data as evenly as possible.
- D. Create standard shares with multiple top-level directories and distribute migrated data.
Answer: B
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/details/?targetId=Files-v3_6:Files-v3_6
NEW QUESTION 78
An administrator is performing a set of routine checks and notes that Prism Central is running with 4 vCPUs and 21 GB RAM. The organizations environment is based on two Nutanix clusters with 170 VMs plus a Legacy vSphere infrastructure. No manual changes have been done on Prism Central VM.
Which configuration justifies the current Prism Central configuration?
- A. Prism Central is running on the legacy duster and requires more RAM.
- B. Nutanix Move is running on Prism Central to import VMs from the Legacy Cluster.
- C. Nutanix Leap and Nutanix Flow have been enabled on Prism Central
- D. Prism Central was installed for Large Deployment environments.
Answer: C
NEW QUESTION 79
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 2 can add an 8GB file without receiving a notification email.
- B. User 1 can add an 8GB file to the share without receiving notification.
- C. User 1 can continue to add another 5GB file but will receive a daily notification email.
- D. User 2 can continue to add another 3GB file but will receive a daily notification email.
Answer: A,C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcept_a
NEW QUESTION 80
A VDI environment based on AHV Cluster is not performing well. The current environment is using only one bridge (Bridge0). The administrator needs to verify if nodes are using all network cards associated to Bridge0.
Which two menus should be used to check the current configuration? (Choose two.)
- A. Network Configuration item in Settings menu
- B. I/O Metrics tab in VM menu
- C. Host view in Network menu
- D. Host NICs tab in Hardware menu
Answer: C,D
NEW QUESTION 81
For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?
- A. * Review Alerts page for NIC speed alerts and alert timing
* Analyze the genesis.out log file for process failures
* Assess the NIC properties in the Network Visualization > Host Properties page - B. * Verify Host/CVM connectivity on the Network Visualization page
* Use to verify the bridge and bond configuration
* Review alerts/events page for the CVM disconnected error - C. * Access the Hardware Page to verify resources are available
* Analyze ail CVM Speed Alerts in the Alerts/Events page
* Analyze output for the network and interface properties and connectivity issues - D. * Restart networking services on the CVM
* Determine the current configuration of the affected CVM via output
* Access the Alerts/Events page for the CVM network connection failures
Answer: B
Explanation:
Explanation
Ref: https://portal.nutanix.com/page/documents/kbs/details?targetId=kA00e000000CuaDCAS
NEW QUESTION 82
An administrator needs to maximize storage potential in a six-node cluster. The container is configured with the following:
* Post-process compression
* Capacity deduplication
What should the administrator configure to increase space savings?
- A. Inline compression
- B. Cache dedupe
- C. Reserve capacity
- D. Erasure coding
Answer: D
NEW QUESTION 83
A company needs to replicate their VMs to a remote site and must have an RPO of less than 1 hour.
When creating a protection domain, what should an administrator do to meet this requirement?
- A. Enable Availability Zones and send the VM to multiple targets
- B. Enable Entity Sync on the designated VMs
- C. Enable Async Replication with an RPO of 60 minutes
- D. Enable Near-Sync Replication with an RPO of 15 minutes
Answer: C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v5_10:sto-pd-guideline
NEW QUESTION 84
Refer to the exhibit.
After performing ESXi to AHV conversion on a cluster, the alerts shown in the exhibit display on Prism. What should the administrator do to resolve this issue efficiently?
- A. Remove the VMs. create a new Protection Domain, and add VMs to it
- B. Remove VMs from the Protection Domain and add them back in.
- C. Create a new Protection Domain and add the VMs to rt.
- D. Delete the Protection Domain, create a new Protection Domain, and add the VMs to it
Answer: B
NEW QUESTION 85
Refer to the exhibit.
An administrator configures Active Directory authentication as shown in the exhibit. Upon finishing setup, users are not able to log in.
What configuration change should be made to fix this issue?
- A. Change leaps to https
- B. Change the Directory URL to use an IP rather than a name
- C. Change the plct from 389 to 636
D Change the Domain to use an IP rather than a name
Answer: C
Explanation:
Explanation
Ref:
https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v510:mul-security-auth
NEW QUESTION 86
......
Following is the info about the Passing Score, Duration & Questions for the Nutanix NCM-MCI-5.15 Exam
Time Duration: 180 minutes
The passing score: 50%
Languages: English, Japanese, and Simplified Chines
Number of Questions: 90 questions
Certification Topics of Nutanix NCM-MCI-5.15 Exam
- Workload Management
- Storage Management
- Data Protection
Get 100% Authentic Nutanix NCM-MCI-5.15 Dumps with Correct Answers: https://pass4sure.guidetorrent.com/NCM-MCI-5.15-dumps-questions.html