Updated Apr-2026 100% Cover Real API-571 Exam Questions - 100% Pass Guarantee Use Real API Dumps - 100% Free API-571 Exam Dumps NEW QUESTION # 22 _______ is the primary alloying agent that affects resistance to oxidation. A. Molybdenum B. Silicon C. Chromium D. Aluminum Answer: C NEW QUESTION # 23 ___________ is the result of cyclic stresses caused by variations in temperature. A. Stress cracking B. [...]

Updated Apr-2026 100% Cover Real API-571 Exam Questions - 100% Pass Guarantee [Q22-Q41]

Share

Updated Apr-2026 100% Cover Real API-571 Exam Questions - 100% Pass Guarantee

Use Real API Dumps - 100% Free API-571 Exam Dumps

NEW QUESTION # 22
_______ is the primary alloying agent that affects resistance to oxidation.

  • A. Molybdenum
  • B. Silicon
  • C. Chromium
  • D. Aluminum

Answer: C


NEW QUESTION # 23
___________ is the result of cyclic stresses caused by variations in temperature.

  • A. Stress cracking
  • B. Thermal fatigue
  • C. Cyclic cracking
  • D. Stress fatigue

Answer: B


NEW QUESTION # 24
Carbonate stress corrosion cracking is the term applied to surface breaking or cracks that occur adjacent to carbon steel welds under the combined action of ____________ and ___________ in carbonate containing systems.

  • A. Temperature, stress
  • B. Corrosion, velocity
  • C. Tensile stress, corrosion
  • D. Tensile stress, velocity

Answer: C


NEW QUESTION # 25
With sulfuric acid corrosion, alloys such as Alloy 20 resist dilute acid corrosion and form a protective ________ film on the surface.

  • A. Chloride
  • B. Iron sulfate
  • C. Iron oxide
  • D. Sulfide

Answer: B


NEW QUESTION # 26
________ has been a major problem on coke drum shells.

  • A. Temper embrittlement
  • B. Stress cracking
  • C. Thermal fatigue
  • D. Erosion

Answer: C


NEW QUESTION # 27
What structure is 304 stainless steel?

  • A. Ferritic
  • B. Duplex
  • C. Martensitic
  • D. Austenitic

Answer: D


NEW QUESTION # 28
When carbon is absorbed into a material at elevated temperatures while in contact with a carbonaceous substance it is called carburization. Temperatures usually have to be above __________ for this to occur.

  • A. 1200(o) F
  • B. 1000(o) F
  • C. 1400(o) F
  • D. 1100(o) F

Answer: D


NEW QUESTION # 29
__________ are the most common type of equipment susceptible to carburization in the refining industry.

  • A. Fin Fans
  • B. Heat exchangers
  • C. Heater tubes
  • D. Reactors

Answer: C


NEW QUESTION # 30
Most brittle failures appear as:

  • A. Intergranular cracking.
  • B. Cleveage.
  • C. Branched cracking.
  • D. Ductile tears.

Answer: B


NEW QUESTION # 31
Susceptibility to temper embrittlement is largely determined by the presence of the alloying elements manganese and _______.

  • A. Moly
  • B. Silicon
  • C. Chromium
  • D. None of the above

Answer: B


NEW QUESTION # 32
In HF service, carbon steel operating above ________ should be closely monitored for loss in thickness and may need to be upgraded to Alloy 400.

  • A. 150(o) F
  • B. 160(o) F
  • C. 200(o) F
  • D. 175(o) F

Answer: A


NEW QUESTION # 33
With creep, increased stress due to loss in thickness from corrosion will ________ time to failure.

  • A. Increase
  • B. Reduce
  • C. None of the above
  • D. Not affect

Answer: B


NEW QUESTION # 34
Low creep ductility is _____ prevalent at the lower temperatures in the creep range. Or low stresses in the upper creep range.

  • A. More
  • B. Less
  • C. Equally
  • D. None of the above

Answer: A


NEW QUESTION # 35
Which of the following materials is not susceptible to high temperature hydrogen attack?

  • A. 300 Series SS
  • B. 5 Cr-1Mo
  • C. All of the above
  • D. 9Cr-1Mo

Answer: C


NEW QUESTION # 36
Thermal fatigue cracks usually initiate on the _________ of the component. They are generally wide and filled with oxides due to the elevated temperatures.

  • A. ID
  • B. Welds
  • C. Surface
  • D. None of the above

Answer: C


NEW QUESTION # 37
A form of corrosion that can occur at the junction of dissimilar metals when they are joined together in a suitable electrolyte is __________.

  • A. Galvanic corrosion
  • B. Cathodic corrosion
  • C. All of the above
  • D. Anodic corrosion

Answer: A


NEW QUESTION # 38
The presence of ________ in H²S streams increases the severity of high temperature sulfide corrosion at temperatures above about 500º F

  • A. Sulfides
  • B. Amine
  • C. All of the above
  • D. Hydrogen

Answer: D


NEW QUESTION # 39
What is the chemical symbol for propane or propylene?

  • A. C4
  • B. CH4
  • C. C2
  • D. C3

Answer: D


NEW QUESTION # 40
The dewpoint of hydrochloric acid depends on the concentration of hydrogen chloride. It is typically about
_________.

  • A. 180º F
  • B. 130º F
  • C. 160º F
  • D. 110º F

Answer: B


NEW QUESTION # 41
......

API-571 Dumps PDF - API-571 Real Exam Questions Answers: https://pass4sure.guidetorrent.com/API-571-dumps-questions.html