[2025] Pass HP HPE0-S59 Test Practice Test Questions Exam Dumps
Verified HPE0-S59 dumps Q&As - HPE0-S59 dumps with Correct Answers
NEW QUESTION # 60
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?
- A. Virtual Volume Set
- B. virtual Volume
- C. Storage Container
- D. App Volume Set
Answer: A
NEW QUESTION # 61
Which compute node parameters are captured within server hardware type?
- A. Mezzanine card configuration
- B. Number of the CPUs
- C. installed operating system
- D. Size of the memory Installed
Answer: A
Explanation:
The server hardware type in HPE OneView captures parameters such as the mezzanine card configuration.
This information is crucial for defining the connectivity and expansion capabilities of the compute node, ensuring that the appropriate resources are available for specific workloads.
NEW QUESTION # 62
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module. Each of the compute nodes has the appropriate storage controller installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that the compute nodes cannot access the storage module. What will you verify first when troubleshooting this problem?
- A. If the SAS logical interconnect is a part of the logical enclosure and has a healthy state.
- B. If there is at least one iSCSI network configured that will provide access to the module.
- C. If the D3940 storage module is properly licensed through the HPE OneView interface.
- D. If the D3940 module is imported in a managed state that allows volume provisioning.
Answer: A
NEW QUESTION # 63
Your customer plans to deploy HPE Superdome Flex and configure two nPars, each based on two chassis Which components must be included in the proposal to meet the customer's needs?
- A. HPE Superdome Flex Grid licenses enabling connectivity between chassis
- B. At least Tour HPE Persistent Memory DIMMs per nPar
- C. Rack Management Controller for nPar management
- D. One base chassis and three expansion chassis with licenses
Answer: A
Explanation:
To deploy HPE Superdome Flex and configure two nPars, each based on two chassis, you must include the HPE Superdome Flex Grid licenses. These licenses enable connectivity between the chassis, allowing the creation of nPars (nPartitions) that span multiple chassis. This is essential for the system's proper configuration and operation in a multi-chassis nPar setup.
NEW QUESTION # 64
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.
- A. HPE OneView Update Readiness Checker
- B. HPE OneView Global Dashboard
- C. HPE OneView Firmware Compliance Report
- D. HPE Composer Maintenance Console
Answer: D
NEW QUESTION # 65
Which compute node parameters are captured within server hardware type?
- A. installed operating system
- B. Number of the CPUs
- C. Mezzanine card configuration
- D. Size of the memory Installed
Answer: A
NEW QUESTION # 66
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Disable deduplication for this volume at the array level
- B. Remove the offline disks using array management tools
- C. Remove the offline disks using Windows Disk Management
- D. Install and configure MPIO on me Windows system
Answer: D
NEW QUESTION # 67
Your customer has me following HPE Synergy setup:
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules
and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules
The customer needs to add a frame.
Which statement about the expansion of this setup is true?
- A. The customer can grow the existing logical enclosure up to 5 frames
- B. The additional frame cannot have 12Gb SAS connection modules installed
- C. The customer has to create a new logical enclosure for the additional frame
- D. The additional frame must have HPE Virtual Connect FC modules installed
Answer: A
Explanation:
HPE Synergy allows scaling of logical enclosures up to 5 frames. Given the current setup of three frames fully populated with HPE Synergy 480 Gen10 Plus modules and other specified components, the customer can add another frame to the existing logical enclosure. This flexibility in scaling ensures that the logical enclosure can be expanded without the need to create a new logical enclosure, provided that the necessary interconnect modules are in place.
NEW QUESTION # 68
Which statement about HPE Superdome Flex firmware updates is true?
- A. HPE OneView is the only tool that can be used to perform I/O updates.
- B. HPE SUM is the only tool that can be used to update HPE Persistent Memory firmware.
- C. RMC CLI is the only tool that can be used to update HPE Persistent Memory firmware.
- D. RMC CLI can simultaneously update complex firmware for multiple HPE Superdome systems.
Answer: D
NEW QUESTION # 69
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?
- A. Pause flood protection
- B. Port flap protection
- C. Storm control
- D. sFlow
Answer: B
Explanation:
Port flap protection is a feature of the HPE Virtual Connect SE 100Gb F32 Module for HPE Synergy that can be configured to disable ports experiencing frequent up and down transitions. This feature helps to stabilize the network by preventing the disruptive effects of port flapping.
NEW QUESTION # 70
When should Private Network be enabled?
- A. When a customer needs a heartbeat network between two compute nodes for building a cluster.
- B. When a customer needs the ability to create a network dedicated to a single compute node.
- C. When a customer needs additional network security by limiting traffic flow for the given network.
- D. When a customer needs each port associated with a given uplink set to be 100Gb/s.
Answer: C
NEW QUESTION # 71
A junior architect designed a solution based on HPE Synergy that must meet the following requirements:
* Support at least 30 HPE Synergy 480 Gen10 Plus compute modules
* Interconnect modules must provide MAC and WWN virtualization
* All HPE Synergy frames must formulate a single management entity
* The management appliance should not be a single point of failure
* Connectivity to FC array should be available to all compute nodesThe proposal consists of:
* 3 HPE Synergy 12000 frames
* 6 HPE Composer 2 modules
* 2 HPE Virtual Connect SE 100Gb F32 Module
* 4 HPE Synergy 50Gb Interconnect Link ModuleWhich statements about this proposed design are true?
(Select two)
- A. FC upgrade licenses for HPE Virtual Connect SE 100Gb F32 Module must be added.
- B. The current setup can support up to 18 HPE Synergy 480 Gen10 Plus compute modules.
- C. The selected interconnect modules do not provide the requested WWN virtualization.
- D. Remove 4 HPE Composer 2 modules from the design, as they are not required.
- E. HPE Synergy 50Gb ILMs must be replaced with HPE Virtual Connect SE 100Gb F32 modules.
Answer: C,D
NEW QUESTION # 72
After deploying HPE Superdome Flex 280 you need to check Core Analysis Engine (CAE) Log.
Click the appropriate section in the HPE Superdome Flex 280 management interface that will allow you to complete this task.
Answer:
Explanation:
NEW QUESTION # 73
Match each HPE Synergy logical component with the definition.
Answer:
Explanation:
NEW QUESTION # 74
Hotspot Question
Click the area within the management interface that will allow you to check whether an HPE OneView SSO certificate is properly applied.
Answer:
Explanation:
Explanation:
The area to check for the HPE OneView SSO certificate is under Security, then HPE SSO.
Security: This section deals with all security-related settings, including certificates.
HPE SSO: This stands for "Single Sign-On" and is the specific technology that HPE OneView uses for integrated authentication. The certificate will be listed here if it's properly applied.
To get to this section, you would click on "Security" in the left-hand navigation menu, and then
"HPE SSO" in the main content area.
NEW QUESTION # 75
Your customer has experience with utilization sampling for HPE Virtual Connect SE 100 Gb F32 Module for HPE Synergy. They have recently purchased HPE VC FC modules.
What must you be aware of regarding utilization sampling for the new modules?
- A. For HPE VC FC modules, utilization sampling is always enabled and cannot be disabled
- B. Utilization sampling for HPE VC FC modules must be enabled manually using CLI.
- C. For HPE VC FC modules, utilization sampling can be enabled once appropriate license is applied
- D. Utilization sampling works the same way tor any type of HPE Synergy interconnect modules
Answer: A
Explanation:
For HPE Virtual Connect Fibre Channel (VC FC) modules, utilization sampling is always enabled by default and cannot be disabled. This feature ensures continuous monitoring of the module's performance and utilization, providing valuable insights for managing the Fibre Channel network.
NEW QUESTION # 76
Refer to the exhibit.
Which statement about this logical interconnect group is true?
- A. An additional license is required to change the enclosure count
- B. interconnect modules are installed in interconnect bays 1 and 4
- C. Both modules are located in different frames for redundancy
- D. For an uplink set, ports from different modules can be selected
Answer: B
Explanation:
In the HPE Synergy setup shown in the exhibit, the interconnect type is Virtual Connect SE 32Gb FC Module for Synergy with an enclosure count of 1 and interconnect bay set 1. Typically, in such configurations, the interconnect modules are installed in bays 1 and 4 for redundancy. This placement ensures high availability and failover capabilities.
NEW QUESTION # 77
How will traffic for a given network be affected if the purpose is changed from General to VM Migration?
- A. Changing this parameter does not affect the behavior of the network or traffic.
- B. This parameter will allow an administrator to define a VMkernel port.
- C. Changing this parameter to VM Migration will give higher priority for vMotion traffic.
- D. If VM Migration is selected, all types of traffic other than vMotion will be blocked.
Answer: C
NEW QUESTION # 78
Your customer has an HPE Synergy frame equipped with a D3940 Storage Module.
Each of the compute nodes has an appropriate storage controller Installed and two 12Gb SAS switches installed in the first fabric.
The customer reports that compute nodes cannot access the storage module.
What should you verify first when troubleshooting this problem?
- A. If the D3940 storage module is property licensed through HPE OneView interface.
- B. If there Is a logical interconnect created based on the 12Gb SAS switches.
- C. If the D3940 module is imported in managed state that allows volume provisioning.
- D. If there is at least one ISCSI network configured that will provide access to the module.
Answer: B
Explanation:
When compute nodes cannot access the D3940 Storage Module in an HPE Synergy environment, the first thing to check is whether a logical interconnect has been created based on the 12Gb SAS switches. Logical interconnects are essential for defining the connection and communication pathways between the compute nodes and the storage module. Without a proper logical interconnect configuration, the compute nodes will not be able to access the storage module.
NEW QUESTION # 79
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?
- A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
- B. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.
- C. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
- D. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
Answer: C
NEW QUESTION # 80
Which statement about a new HPE SimpliVity deployment is true?
- A. AM new HPE SimpliVity models are software optimized
- B. A new HPE SimpliVity node can be a member of multiple dusters
- C. All new HPE SimpliVity models are based on mid CPUs
- D. New HPE SimpliVity deployments gives customer flexible choice of hypervisor
Answer: D
Explanation:
New HPE SimpliVity deployments offer customers the flexibility to choose between different hypervisors, such as VMware vSphere and Microsoft Hyper-V. This flexibility allows customers to select the hypervisor that best fits their existing infrastructure and operational preferences.
NEW QUESTION # 81
An HPE Synergy customer needs to prevent a timeout and loss of communication during an external switch firmware upgrade.
Click the parameter that the customer should configure within an uplink set to meet this requirement
Answer:
Explanation:
Explanation:
To prevent a timeout and loss of communication during an external switch firmware upgrade, the customer should configure theLACP failover triggerwithin the uplink set. By setting the LACP failover trigger to "All active uplinks transition to offline," the configuration ensures that the traffic will be redirected to available uplinks in the event of an uplink failure or during the upgrade process, maintaining communication and preventing timeouts.
NEW QUESTION # 82
Your customer plans to use HPE OneView for VMware vCenter Server to deploy ESXi systems. They created a server profile template that they want to use in HPE OneView.
Put the steps required to configure HPE OneView for VMware vCenter Server on the left into their correct order on the right.
Answer:
Explanation:
Explanation:
To configure HPE OneView for VMware vCenter Server to deploy ESXi systems, follow these steps in the correct order:
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server.
* Upload HPE-friendly ESXi image.
* Deploy new ESXi systems using vCenter Server interface.
* Add HPE OneView credentials to the vCenter Server and create OS Deployment Plan: Integrate HPE OneView with vCenter Server by adding the necessary credentials and setting up the OS Deployment Plan.
* Add vCenter Server to HPE OneView for VMware vCenter Server: Ensure that vCenter Server is added to HPE OneView for VMware vCenter Server to enable communication and management.
* Upload HPE-friendly ESXi image: Upload an ESXi image that is optimized for HPE hardware to the vCenter Server for use in the deployment process.
* Deploy new ESXi systems using vCenter Server interface: Use the vCenter Server interface to deploy new ESXi systems based on the created server profile template and the uploaded ESXi image.
These steps ensure a seamless deployment and management of ESXi systems using HPE OneView integrated with VMware vCenter Server.
NEW QUESTION # 83
......
HPE0-S59 certification guide Q&A from Training Expert GuideTorrent: https://pass4sure.guidetorrent.com/HPE0-S59-dumps-questions.html