Use Real HP Achieve the HPE0-S59 Dumps - 100% Exam Passing Guarantee
Verified HPE0-S59 Q&As - Pass Guarantee HPE0-S59 Exam Dumps
To be eligible for the HP HPE0-S59 (HPE Compute Solutions) Certification Exam, candidates must have a minimum of one year of experience working with HPE compute solutions. It is recommended that candidates have experience with HPE ProLiant servers, HPE Synergy, and HPE OneView. Additionally, candidates should have a strong understanding of server virtualization, storage solutions, and networking concepts.
HP HPE0-S59 (HPE Compute Solutions) Certification Exam is designed to test the knowledge and expertise of IT professionals in designing, implementing, and maintaining HPE compute solutions. HPE Compute Solutions certification is intended for individuals who have experience working with HPE products and solutions and want to showcase their skills and knowledge to potential employers. HPE0-S59 exam covers a range of topics, including HPE compute solutions architecture, configuration, management, and troubleshooting.
NEW QUESTION # 50
Your customer has the following HPE Synergy setup:
- 15 HPE Synergy 12000 frames with 50Gb connectivity to each server port
- 2 HPE Composer 2 modules
- 15 HPE D3940 Storage Modules, one per frame
- 2 HPE 12Gb SAS switches per frame
Which statement about this setup is true?
- A. The customer can install up to 12 HPE Synergy 480 compute nodes per frame.
- B. To manage 15 frames, additional HPE Composers are required.
- C. If properly cabled, any compute node can access any HPE D3490 storage module
- D. The customer must create at least five logical enclosures for this setup.
Answer: D
Explanation:
With 15 HPE Synergy 12000 frames, the customer must create multiple logical enclosures to manage the setup efficiently. HPE Synergy typically supports up to five frames per logical enclosure, meaning that at least five logical enclosures would be necessary to manage all 15 frames. This ensures proper organization, management, and scalability of the resources.
NEW QUESTION # 51
A logical interconnect group can span on multiple HPE Synergy frames for which interconnect type?
- A. HPE Virtual Connect SE 100 Gb F32 Module tor Synergy
- B. Brocade 32GB Fibre Channel Switch Module for HPE Synergy
- C. HPE virtual Connect SE 32 Gb FC Module for Synergy
- D. HPE Synergy 12 Gb SAS Connection Module
Answer: A
NEW QUESTION # 52
Refer to the exhibit.
Which statement about this logical JBOD is true?
- A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
- B. This logical JBOD can be presented to the compute nodes in a different frame.
- C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
- D. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
Answer: B
Explanation:
In HPE Synergy, logical JBODs (Just a Bunch of Disks) can be configured to be accessible by compute nodes across different frames. This flexibility allows for the logical JBOD to be presented to compute nodes that are not in the same frame as the storage module, facilitating better resource utilization and workload management.
NEW QUESTION # 53
Match each HPE OneView network type with its definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE OneView network type with their respective definitions:
* Internal network Definition: A network that does not utilize any uplink ports and is used for communication between servers in the same frame.
* Tagged network Definition: A network in which any tagged packets are dropped and forwarding is done by a MAC address.
* Tunnel network Definition: A network with a dedicated set of uplink ports used to pass a group of VLANs without changing the VLAN tags.
* Untagged network Definition: A network that contains multiple networks on a single uplink set that allows your customer to share uplinks with those networks.
* Internal network: This network type facilitates communication between servers within the same frame without utilizing uplink ports, providing internal data exchange.
* Tagged network: This network type drops any packets that are tagged and forwards packets based on their MAC address, ensuring only untagged traffic is processed.
* Tunnel network: This type of network uses a specific set of uplink ports to pass VLAN groups while preserving the VLAN tags, useful for maintaining VLAN configurations across different network segments.
* Untagged network: This network type enables the sharing of uplinks among multiple networks by placing them on a single uplink set, useful for optimizing network resource usage.
NEW QUESTION # 54
Your customer reports mat an external FC boot volume for Windows server is visible four times in the Disk Management 1 online and 3 offline.
What should you do to resolve this issue?
- A. Install and configure MPIO on me Windows system
- B. Disable deduplication for this volume at the array level
- C. Remove the offline disks using Windows Disk Management
- D. Remove the offline disks using array management tools
Answer: A
NEW QUESTION # 55
Match HPE SimpliVity team with the definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE SimpliVity term with their respective definitions:
* Arbiter Definition: Facilitates communication between nodes and resolves state conflicts to ensure service continuity.
* Compute node Definition: Non-hyperconverged servers that can exist in an HPE SimpliVity environment and provide additional compute capacity while consuming the storage provided by the hyperconverged nodes.
* Intelligent Workload Optimizer Definition: Integrates with VMware Distributed Resources Scheduler to ensure optimal placement of the VM compute resources.
* Management Virtual Controller Definition: Provides centralized management and events end-point for vCenter.
* Arbiter: The Arbiter in an HPE SimpliVity environment is responsible for ensuring communication between nodes and resolving any state conflicts, which is crucial for maintaining service continuity.
* Compute node: In an HPE SimpliVity environment, a compute node refers to non-hyperconverged servers that provide additional compute capacity while utilizing the storage from hyperconverged nodes.
* Intelligent Workload Optimizer: This component integrates with VMware's Distributed Resources Scheduler (DRS) to optimize the placement of virtual machine (VM) compute resources, ensuring they are efficiently distributed across the environment.
* Management Virtual Controller: This controller provides centralized management and serves as the events end-point for vCenter, allowing for streamlined management and monitoring of the SimpliVity environment.
NEW QUESTION # 56
Your customer has the following HPE Synergy setup
- 3 HPE Synergy 12000 Frames
- 4 HPE Virtual Connect SE 100 Gb F32 Modules
- 2 HPE Synergy 50 GO Interconnect Link Modules
- 36 HPE Synergy 480 Gen10 Plus compute modules
- 2 HPE Composer 2 modules
Which statement about this setup is true?
- A. The customer must buy 36 HPE OneView Advanced licenses to manage compute modules
- B. The customer can add one D3940 storage Module to each of the frames
- C. To manage all frames, the customer must buy two additional HPE Composer 2 modules
- D. To use all compute nodes, the customer must create at least two logical enclosures
Answer: D
Explanation:
In an HPE Synergy environment, a logical enclosure represents a management domain that groups multiple Synergy frames and their associated compute, storage, and fabric resources. Given the setup with 3 HPE Synergy 12000 Frames and the specified components, the customer must create at least two logical enclosures to effectively manage all compute nodes and resources across multiple frames. This ensures proper resource allocation, management, and redundancy.
NEW QUESTION # 57
Which statement about the SY480 Gen10 Plus Compute Module is true?
- A. It cannot be mixed with Gen9 compute modules in the same frame.
- B. It only supports NVDIMM Persistent Memory.
- C. It supports 8 memory channels and memory DIMMs of up to 256GB.
- D. It supports "3rd Gen AMO EPYC Server Processors with 64 cores.
Answer: B
NEW QUESTION # 58
You are troubleshooting an HPE OneView server profile that presents a critical state.
The server profile was configured with a Link Aggregation Group.
What should you check to fix the issue?
- A. if both FiexNICs are configured with the same speed
- B. if the logical enclosure is configured with redundant master modules
- C. if both FiexNICs are connected to different networks
- D. If the logical enclosure is built on at least three HPE Synergy frames
Answer: A
Explanation:
When troubleshooting a server profile in HPE OneView that is in a critical state due to a Link Aggregation Group (LAG), it is important to check if both FlexNICs are configured with the same speed. Inconsistent speeds can cause issues with link aggregation, leading to network instability and performance degradation.
NEW QUESTION # 59
Match each HPE OneView network type with its definition.
Answer:
Explanation:
NEW QUESTION # 60
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?
- A. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
- B. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities
- C. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
- D. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
Answer: B
Explanation:
HPE OneView for VMware vCenter Server provides integrated management and monitoring capabilities for systems managed by HPE OneView. This means that to leverage the full functionality of HPE OneView for VMware vCenter Server, the systems (both HPE Synergy and HPE ProLiant servers) must be managed through HPE OneView. This integration allows for comprehensive infrastructure management directly from the VMware vCenter interface.
NEW QUESTION # 61
Your customer used to manage their HPE 3PAR arrays using HPE OneView. Now they have replaced these arrays with HPE Primera.
How does managing the new arrays compare to managing their old arrays?
- A. HPE OneView offers additional functionalities for HPE Primera like CPG management.
- B. Management procedures and features are the same for both types of the array.
- C. To manage HPE Primera using HPE OneView, a dedicated license is required.
- D. HPE OneView offers limited support for HPE Primera because of the firmware differences.
Answer: D
Explanation:
HPE OneView offers limited support for HPE Primera compared to HPE 3PAR, primarily due to firmware architecture and integration differences. While basic monitoring is available, advanced provisioning and management features are not as fully integrated for Primera as they were for
3PAR.
NEW QUESTION # 62
Your customer is implementing an HPE Synergy solution based on three frames.
Click each of the ports that can be used to connect satellite modules.
Answer:
Explanation:
NEW QUESTION # 63
Refer to the exhibit. Which statement about this logical interconnect group is true?
- A. The master modules are located in the interconnect bays 2 and 5
- B. For the given downlink speed, the maximum number of frames is reached
- C. To use interconnect bay set 3, all compute nodes must be half-height
- D. Both master modules are located in the same HPE S ynergy frame
Answer: D
Explanation:
The Redundancy type is Redundant which means the Interconnects live on the same frame.
VC SE 100Gb F32 Module is to be slotted in bay 3 (interconnect bay 3 & 6).
5 frames are able to be added to and Enclosure group with a downlink speed of 25Gb/s.
NEW QUESTION # 64
Match each HPE OneView network type with its definition.
Answer:
Explanation:
Explanation:
Here are the correct matches for each HPE OneView network type with their respective definitions:
* Internal networkDefinition:A network that does not utilize any uplink ports and is used for communication between servers in the same frame.
* Tagged networkDefinition:A network in which any tagged packets are dropped and forwarding is done by a MAC address.
* Tunnel networkDefinition:A network with a dedicated set of uplink ports used to pass a group of VLANs without changing the VLAN tags.
* Untagged networkDefinition:A network that contains multiple networks on a single uplink set that allows your customer to share uplinks with those networks.
* Internal network:This network type facilitates communication between servers within the same frame without utilizing uplink ports, providing internal data exchange.
* Tagged network:This network type drops any packets that are tagged and forwards packets based on their MAC address, ensuring only untagged traffic is processed.
* Tunnel network:This type of network uses a specific set of uplink ports to pass VLAN groups while
* preserving the VLAN tags, useful for maintaining VLAN configurations across different network segments.
* Untagged network:This network type enables the sharing of uplinks among multiple networks by placing them on a single uplink set, useful for optimizing network resource usage.
NEW QUESTION # 65
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays Where should you start the troubleshooting process?
- A. At HPE OneView Interface to verify whether the iLO processor is disabled
- B. At the iLO interface to verify whether the ILO Advanced license is properly applied
- C. At HPE OneView Interface to verify whether the server is In the maintenance mode
- D. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
Answer: B
NEW QUESTION # 66
Which statement about the HPE D3940 storage module is true?
- A. it is configured through CLl available from HPE Synergy console
- B. SATA drives requires redundant 10 adapters to be installed in this module
- C. Only one type of drives (SATA, SAS, SSD) can be installed in each module
- D. Up to five modules can be installed in a single frame with Gen10 servers
Answer: D
Explanation:
The HPE Synergy D3940 Storage Module is a direct-attached storage (DAS) expansion option for HPE Synergy environments. It is integrated within the Synergy frame and connects to compute modules through HPE Synergy SAS Connection Modules and Smart Array controllers.
NEW QUESTION # 67
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView.
Put the steps to achieve this goal into the coned order in the answer area on the right.
Answer:
Explanation:
NEW QUESTION # 68
Which statement about a new HPE SimpliVity deployment is true?
- A. All new HPE SimpliVity models support deduplication and compression
- B. All new HPE SimpliVity models are based on AMD CPUs
- C. New HPE SimpliVity deployments are licensed per node not per physical socket
- D. New HPE SimpliVity deployments give customer flexible choice of hypervisor
Answer: A
Explanation:
All new HPE SimpliVity models are designed with integrated deduplication, compression, and optimization capabilities. These features are fundamental to the HPE SimpliVity architecture, providing enhanced storage efficiency and performance. Deduplication and compression reduce the amount of data stored and transmitted, which improves the overall efficiency of data management in the hyper-converged infrastructure.
NEW QUESTION # 69
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?
- A. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
- B. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
- C. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.
- D. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
Answer: A
NEW QUESTION # 70
......
Briefly explain the Certification Worth of the HP HPE0-S59 Exam
The HPE0-S59 certification exam is a great way to prove your expertise in the field of IT. The HP HPE0-S59 exam will prove to be beneficial for your career growth as well.
This certification exam is related to the data center solutions and services, which means that this exam has been designed with the purpose of helping you understand how to implement and manage these solutions. With this certification, you will be able to provide better solutions for your clients and improve their business results. HP HPE0-S59 exam dumps are the only way to get certified.
This certification will also help you create a better environment for your organization by enabling you to identify any issues related to security, availability, performance and scalability of applications hosted in the data center. This is because the HP HPE0-S59 test evaluates knowledge on new technologies like cloud computing, virtualization and automation; it also evaluates knowledge on traditional IT solutions like storage area networks (SANs), network attached storage (NAS) and shared storage environments running multiple operating systems.
Check the Free demo of our HPE0-S59 Exam Dumps with 118 Questions: https://pass4sure.guidetorrent.com/HPE0-S59-dumps-questions.html